|
INJ-C201G-bt-H-100-24-T
Industrial Gigabit Enhanced PoE++ Injector - 1*10/100/1000Base-T(X) with Enhanced PoE-PSE (H-Type)(100W/Port) and 1*10/100/1000Base-T(X), Booster Version, 9~55VDC; EOT: -40°C to 75°C
INJ-C201G-bt-H-100-24-T Industrial PoE Injector
$363.00
22
Request Information
To request more information regarding our products, please fill out the following online form and a customer service
representative will contact you immediately. Fields marked (*) are required. Thank you.
Overview
Antaira Technologies’ INJ-C201G-bt-H-100-24-T PoE injector is the solution for deploying data and power for a non-PoE switch to an end PD device. This PoE injector is a brilliant low-cost solution when the application requires PoE from a non-PoE data source.
INJ-C201G-bt-H-100-24-T supports low voltage 9VDC model with power booster technology, ensuring full 90W PoE output from 12VDC power input, for better usage in the transportation and automation industry. Moreover, for special applications which require more PoE power from the PSE device, this model also supports Enhanced PoE mode to offer up to 100W to the powered device from a low 24VDC input. INJ-C201G-bt-H-100-24-T with fan-less design boosts PoE for powering high-power devices and is designed for use in multiple applications. It works perfectly in wide temperature from -40°C to 75°C, and undoubtedly is your best option in the industrial market.
Features
- Supports 10/100/1000Tx for PoE & Data Out
- IEEE 802.3af/at/bt Compliant PoE (Special H Type)
- Provide Data and Power over Ethernet to Power Device
- Provides up to 100 Watts on PoE Port
- Provided Power Booster Technologies for Low Voltage Power Inputs
- Redundant 9~55VDC Power Inputs Design
- Dip-Switch Setting for PoE Mode and Dual PD Check
- IP30 Protection
- Operating Temperature Range: -40°C to 75°C
- DIN-Rail or Wall Mountable
- 5-Year Warranty
Accessories
|
PoE (Power over Ethernet) injectors are devices used to supply electrical power to network devices over an Ethernet cable. Ethernet cables typically transmit data, but with the introduction of PoE technology, they can also carry power to compatible devices.
A PoE injector is a standalone device that connects to a power source, such as a wall outlet, and an Ethernet switch or router. It injects power into the Ethernet cable, allowing it to simultaneously transmit data and provide electrical power to a connected PoE-enabled device. Providing PoE to devices can be achieved with a single port PoE injector to combine both power and data onto a single RJ45 Ethernet cable.
The main purpose of PoE injectors is to simplify the installation and deployment of network devices, particularly in situations where it may be difficult or inconvenient to provide separate power sources for each device. PoE eliminates the need for additional power cables and outlets, reducing the complexity and cost of installation.
PoE injectors typically adhere to the IEEE
802.3af, 802.3at, and 802.3bt standards, which define the specifications for delivering power over Ethernet. These standards specify the maximum PoE power budget that can be delivered, with 802.3af supporting up to 15.4 watts per port, 802.3at (also known as PoE+) supporting up to 30 watts per port, and 802.3bt (PoE++) supporting up to 90 watts per port.
Common applications of PoE injectors include powering IP phones, wireless access points, IP cameras, network switches, and other network-connected PoE devices. It's important to ensure that the devices being powered are compatible with PoE, as not all network devices support this technology by default.
|
|
|
|
|
|
|